EZ GO workhorse 02 ST350 clutch slipping
 

First of all my apololies for posting in the introI have a 02 ezgo workhorse st350 and the clutch seems to be slipping in and out, even though everything looks allright it makes a squeaking sound if put in nuetral and drifted down a hill like something is really tight! Belt has been replaced and no help. Can I rebuild this clutch? Can parts be found to rebuild? It does squeeze the belt as rpms go up and rides in the higher part of the clutch. Can anyone Help, not much money but I have a lot of time and I am a car mechanic which should help me a bit. Thanks, Maxx

Re: EZ GO workhorse 02 ST350 clutch slipping
 

I don't know what is squealing in your clutch but i do know that both clutches are rebuildable .... Call CPP from our sponsor list and ask them about your clutch parts. They can help :thumbup:

http://www.buggiesgonewild.com/site-sponsors.php

Re: EZ GO workhorse 02 ST350 clutch slipping
 

Thanks Scotty, but first I need to locate the problem. Is there is 2 cluthes on this cart? I can get it to move but its slipping and grabbing slipping and grabbing and never fully engaged. If 2 people got on it I cant even get it to move. And the free roll squeaking does the same, slipping and grabbing, any ideas

Re: EZ GO workhorse 02 ST350 clutch slipping
 

Sounds like a good cleaning and lubrication are in order. no big job.
parts from CCP

Re: EZ GO workhorse 02 ST350 clutch slipping
 

like crash said, no biggy. sounds like the weights inside are hanging up :thumbup:

Re: EZ GO workhorse 02 ST350 clutch slipping
 

how do I go about taking it apart and checking the weights, would that cause slipping?

Re: EZ GO workhorse 02 ST350 clutch slipping
 

Be sure the belt is in good condition while inspecting. That will slip and squeal.

Re: EZ GO workhorse 02 ST350 clutch slipping
 

:thumbup:i would check that before i take anything apart.

Re: EZ GO workhorse 02 ST350 clutch slipping
 

Belt was first thing I bought, its brand new. feels like something sticking inside. Only squeals when in neutral and Im drifting and its like the brakes are half on but brakes are all fine. I havent takinen the clutch apart yet, not sure how or whats in it, does anyone have a diagram of the inside of the clutch and how to take apart? Thanks Maxx

Re: EZ GO workhorse 02 ST350 clutch slipping
 

Crash, you said to check CCP for parts, I cant seem to find them, do you have a number? Thanks again, Maxx