1996 g19e battery tray height
Replacing battery tray ,I need the distance from bottom of controller to L angle support where it is welded to frame.Numbers I wrote down before cutting old one out don't jive.
|
Re: 1996 g19e battery tray height
OldDog i can measure this evening when i get home might need a little more info on what you need measured. i can shoot you some pictures
|
Re: 1996 g19e battery tray height
The battery tray is welded under the controler to the floor frame.If you could measure from the bottom,or top of controller to the battery tray angle iron would be great.I have the body off so it might be a pain for you
Wayne |
Re: 1996 g19e battery tray height
shoot i dropped the ball on this.
do you still need the measurement Ken |
Re: 1996 g19e battery tray height
Yes if it is possible
|
Re: 1996 g19e battery tray height
tried to measure. and finally had to pull the body.8)
looks like 8 and 9/16 inch from the angle that the batteries set on to the top of the controller. just to make a point this the part of the angle iron that is parallel to the bottom of the battery not the part that sticks up. ken |
Re: 1996 g19e battery tray height
Thanks at least I got one thing right ha ha
|
All times are GMT -5. The time now is 05:13 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.