No power after replacing solenoid
 

I have a 96 DS club car, 36volt and for the 2nd time have replaced the solenoid but still have no power (batteries are fully charged). There is no click from the solenoid either.

Initially I wired the first one up incorrect so assumed I fried the solenoid and/or diod do this time I replace both and am certain it is wired correctly. When I jump the soleniod it moves but otherwise nothing.

When I wired the first one wrong could I have effected the ignition? The limit switch? Also, this cart has a "snubber" that connects onto the small posts of the solenoid. Could that be bad? New to cart ownership so just picking this up.

Any suggestions would be appreciated.