IQ Precedent cutting off
 

Cart runs fine for a 5 to 15 min run then shuts down let it sit and goes again the aluminum beside run tow switch gets hot its like a shut down changed controller still same prob but last a little longer motor get hot so l changed motor ,still having similar prob everything is stock and problem mainly on low creeping speeds.batteries and connections are good.looking for extra info, thanks

Re: IQ Precedent cutting off
 

Have you changed the cables? Perhaps you have some corrosion inside the calbe insulation causing the heat?

Re: IQ Precedent cutting off
 

All cables have been upgraded to 4ga recently

Re: IQ Precedent cutting off
 

Are you running a factory controller? Is the cart lifted? Is the cart loaded with heavy cargo or accessories?

Re: IQ Precedent cutting off
 

Everything factory except 6'' lift 22 in tires the cart is not loaded down ,does it on lower speeds if it ever stalls takes 5 min and have to run wide open to keep from stalling again.

Re: IQ Precedent cutting off
 

Throw a bag of ice in the battery compartment and let it rest against the controller plate. That'll confirm if it is or isn't a Thermal Cutback issue within the controller. It shouldn't be heating up that fast unless you're just creeping through the woods. If that's what you're doing, it's normal. A series conversion may be what you need.

Re: IQ Precedent cutting off
 

Does anyone know how this one ended up ?? Was it a heat issue or something else ??