|
paint prep
Do I need to use an adhesion promoter or anything else before I spray my cart body? I am going to use a single stage acrylic urethane.
|
Re: paint prep
What kind of cart? What's the body made of?
|
Re: paint prep
As long as you sand it before you paint it you shouldnt need anything for adhesion. The right way to do it would be to sand it with 320 grit sandpaper, and then spray a sealer on it before you paint.
|
Re: paint prep
All of the above are accurate, but injected molded bodies used a release agent in the molding process that can cause problems when applying paint to a body that was originally "dyed" thoughout. That applies to almost all "plastic" bodied" carts. If it's more than 0-10 years old those release agents are probably gone anyway, but either sealing it first or using an adhesion promoter will both enhance the look and add to the durability. Assuming you are sanding in the prep process no matter what you have. Any paint job is 90 percent prep!
|
Re: paint prep
Sorry. "9-10" years is what I meant, but it really pays to prep properly no matter how old the body is......
|
Re: paint prep
Sorry forgot to mention it s for a 2004 yamaha. Yes it does have a plastic body, and yes I am sanding it well prior to doing any other processes. Just curious as to wht is best practice for prep prior to paint. Thanks for all the help.
|
| All times are GMT -5. The time now is 02:20 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.