Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Lifted Golf Carts (https://www.buggiesgonewild.com/forumdisplay.php?f=24)
-   -   What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back (https://www.buggiesgonewild.com/showthread.php?t=72628)

mdgifford 11-07-2012 02:20 AM

What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back
 
I have a RXV and I'm looking at the ITP SS112 14"x8" Chrom wheels, I see several offest options 3+3, 4+2, 3+5 and a few other choices, which offset should i use and what size tires do i need?

I have the following
Jakes 6" lift kit
2" spacer on the rear
1" spacer on the back

Thank you for your help I'm desperate since my cart is sitting on jack stands until i figure this out.

gray horse 11-07-2012 08:34 AM

Re: What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1"
 
From what I've seen, most guys with a 6" lift or bigger will run a negative offset such as 3x5, 2x6. This will move the wheel out away from the frame to help eliminate rubbing issues when you turn. Offsets such as 4x4, 5x3 are more of a stock offset, where there is no lift and stock or low profile tire sizes.
The offset is the distance from the back of the center hub to the edge of the rim. A negative offset, such as a 3x5, means from the back of the center of the wheel to the edge of the rim is 3" and from the front of the center to the edge is 5". A positive offset such as 5x3 is just the opposite. More distance in the back of the wheel than in the front. Hope this helps some.

mdgifford 11-07-2012 09:26 AM

Re: What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1"
 
Thank you for the info, one more question, does it matter that I have spacers already on my hubs that are also the Jake spindle kits? They push my hubs out a pretty good amount. Just curious. Thank you again

gray horse 11-07-2012 04:54 PM

Re: What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1"
 
It doesn't matter, it's really more of a personnal preference thing. If you have the clearence without the spacers and like the way it looks then by all means go without them. I will say that on a lifted cart the wider stance is a bit more stable. I've got a 6" in lift with 2" wider front and running a 2x5 offset with 2" spacers all around. Love the wide stance.


All times are GMT -5. The time now is 10:43 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.