Buggies Gone Wild Golf Cart Forum
Page 1 of 6 1 23 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Big Block Talk! (https://www.buggiesgonewild.com/forumdisplay.php?f=30)
-   -   780 drive clutch for Big Block Carts (https://www.buggiesgonewild.com/showthread.php?t=28489)

roady89 01-26-2010 07:18 AM
780 drive clutch for Big Block Carts
 

Briggs and Honda V-twin 780 Drive Clutch



Comet 780 Clone for vtwin golf cart swaps. These 780 series drive clutches come with a 1 inch bore and 1/4 inch keyway. Tuning kits for these clutches are also available. I am not sure of the availabilty of the 780 drive from our sponsors. (not sure who has them yet) I don't think this company would not sell them if they they thought they were junk. Also helped spec them.
The 780 Drive uses a standard 1-3/16 inch wide symmetrical CVT belt.

780 clone drive clutch

780 drive clutch


I say clone because they said, and I quote, "The 780 drive is no longer manufactured in the U.S".........

wrenflyer 01-26-2010 12:42 PM
Re: 780 drive clutch for Big Block Carts
 
So where is this "clone" available from?

Flintrock 01-26-2010 12:52 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by wrenflyer (Post 347898)
So where is this "clone" available from?
CPP has em up on their website:

http://www.cartpartsplus.com/comet-7...nt-clutch.html

wrenflyer 01-26-2010 01:02 PM
Re: 780 drive clutch for Big Block Carts
 
I'm officially confused.....

Tom only has 2 more 780's left for the CC BB conversion kits. No more until a replacement clutch is found. Yet, this clutch is touted as a 780 replacement. :?

Is it larger than the 780?

TheNewGuy 01-26-2010 01:14 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by Flintrock (Post 347909)
This is a replacement for the 780, I spoke with Tom yesterday.

wrenflyer 01-26-2010 01:22 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by TheNewGuy (Post 347924)
This is a replacement for the 780, I spoke with Tom yesterday.
But it will not fit a Club Car V-Twin conversion, from what I have been told.

TheNewGuy 01-26-2010 01:26 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by wrenflyer (Post 347927)
But it will not fit a Club Car V-Twin conversion, from what I have been told.
Did Tom tell you that?

wrenflyer 01-26-2010 01:31 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by TheNewGuy (Post 347929)
Did Tom tell you that?
Yes, In a PM yesterday. I'm in a pickle, I want to add the BB kit to my 90 model CC that I'm rebuilding now. Don't need to spend the money on the kit until my extra truck sells.....but he's almost out of kits because of the clutch. With my luck, the day the truck finally sells he'll be out of them! :oops:

TheNewGuy 01-26-2010 02:10 PM
Re: 780 drive clutch for Big Block Carts
 
Well, hopefully Tom will have some of these "780 clones" by the time you are ready.

wrenflyer 01-26-2010 02:17 PM
Re: 780 drive clutch for Big Block Carts
 
Quote:
Originally Posted by TheNewGuy (Post 347951)
Well, hopefully Tom will have some of these "780 clones" by the time you are ready.
Agreed! :mrgreen::mrgreen:

To me, The clutch pictured above looks different from the one in CPP's website.


All times are GMT -5. The time now is 03:56 PM.
Page 1 of 6 1 23 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.