Kawasaki 440 Sled Motor into 84 EZGO
I have just acquired a Kawasaki 440 Motor that I plan on installing into my 84 EZGO.
First (of many I am sure) wall I have hit is how do work out the motor and the stock EZGO Rear end. If I lineup the two clutches it will work but I will have the fastest EZGO Golf cart that only goes backwards. The EZGO Driven clutch is perpendicular to the rear end. Not enough clearance over the axle to mount to motor over it to its facing the correct direction. Any thoughts? |
Re: Kawasaki 440 Sled Motor into 84 EZGO
Quote:
|
Re: Kawasaki 440 Sled Motor into 84 EZGO
Did you ever figure this out, cause I got a kawasaki 340 I'm gunna throw in a 86 my ezgo model is a gtx800
|
Re: Kawasaki 440 Sled Motor into 84 EZGO
Quote:
That said, finding a 1994-up transaxle/axle shouldn't be too hard, and all in all would probably be the easiest and cheapest solution with the least amount of hardcore fab work. |
Re: Kawasaki 440 Sled Motor into 84 EZGO
I'm completely fine with just forward, where I go is forgiving haha, but could you make it go forward only?
|
All times are GMT -5. The time now is 02:16 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.