Keep blowing 10 Amp Fuse
 

2013 Yamaha G 29 ran fine one evening, the next morning nothing. The 10 amp fuse blows every time we push down on the pedal which also causes the back up alarm to go out. If I put a new fuse in the back up alarm will sound and all is fine, then when we press the pedal it pops the fuse. Can't find any bare wires and the yamaha deal gave me a new harness running to the regulator but that didn't solve the problem. Frustrating trying to figure out this negative ground fuse issue. Had this cart 3 weeks with no problems at all.

Re: Keep blowing 10 Amp Fuse
 

any update on it

Re: Keep blowing 10 Amp Fuse
 

No updates. Hoping for smallblock to respond being tha he is the Yamaha guy. Really frustrated.

Re: Keep blowing 10 Amp Fuse
 

Don't know about the Yamaha guy, but.....Has the battery been changed? has the starter been out? I would check battery polarity and correct connections first. Since you have found no bare/grounded wires....I would unplug the voltage regulator/engine stop relay/starter charging wires and the back up buzzer micro switch. Now does the fuse blow when pedal pushed? Plug in one component at a time till the fuse blows. Let us know what you find.

Re: Keep blowing 10 Amp Fuse
 

I bypassed the start/stop switch and it started and ran without popping the 10 amp fuse. Should have a new switch tomorrow and should be good to go.
Thanks

Re: Keep blowing 10 Amp Fuse
 

let me know how you end up becouse i have a g9 and iam on the seame bout