Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   Need help with speed controller (https://www.buggiesgonewild.com/showthread.php?t=69558)

Bajaranger 08-29-2012 04:06 PM
Need help with speed controller
 
Need help installing a cutis speed controller on a 2000 club car. Model number 1510-5201. The new controller has a s1 and s2 wire and I can't figure where they go. The old controller has 3 wires a 1 2 and 3.

TahoeDawgZ71 08-29-2012 09:59 PM
Re: Need help with speed controller
 
Wrong controller. The controller you're trying to install is for a Shunt-Wound motor setup or (Sepex) vehicle. Your car is setup for a series-wound motor. Not compatible at all.

Bajaranger 09-18-2012 01:34 PM
Re: Need help with speed controller
 
What speed controller can I use on my cart. It's a 48v cart

Golfdog 09-18-2012 03:30 PM
Re: Need help with speed controller
 
Quote:
Originally Posted by Bajaranger (Post 777872)
What speed controller can I use on my cart. It's a 48v cart
Have a look at www.alltraxinc.com they have NPX, AXE and SPM controllers for your cart

TahoeDawgZ71 09-18-2012 04:40 PM
Re: Need help with speed controller
 
A series controller for a 48V Car with 5K-0 throttle input


All times are GMT -5. The time now is 11:29 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.