Turn signal and brake light wiring
 

Hi im trying to upgrade my ezgo 2001 to make it street legal. Anyone have a diagram for turn signals?

Re: Turn signal and brake light wiring
 

Welcome to the forum stan354...................

Match up the connectors for the Head Lights and the Tail Lights if there are no instructions.

Next you may have 2 sets of 2 wires extra about midway of the harness. one set will be for the brake light switch and the other for the horn button. Don't forget the 2 near the head lights for the horn itself.

......... that is, of course, if it has a horn. Some kits also have connections for a dimmer switch for High & Low beams........................

Re: Turn signal and brake light wiring
 

Thanks for the info.

My turn signal kit is a 7 wire type and just wanted to get some of the wires run while waiting for it to come.

Re: Turn signal and brake light wiring
 

http://dratv.com/fowhtusikita.html Try this site it has diagram .

Re: Turn signal and brake light wiring
 

Thanks for the link.

Re: Turn signal and brake light wiring
 

Stan.........

For what it's worth, and I may be too late, or I may not even know what I'm talking about, but most light kits come with the complete wiring loom complete with connections already on the wires. I am assuming you know this already. You can get just the lights alone too.

Re: Turn signal and brake light wiring
 

Rusty the Turn signal kit I ordered has wires to just below the column. My cart has the tail light with a 1157 bulb but is not wired like a car with a ground and one wire for each element (1 for brake and 1 for tail).It has 2 wires both to the bulb and only lites the tail light. I just trying to make scence of the whole thing.

Re: Turn signal and brake light wiring
 

Try this
http://www.photolocker.net/images/pg...irediagram.jpg

Re: Turn signal and brake light wiring
 

My kit is very much like this but, it has a white wire also. I am thinking it is a separate ground ot frame but do not want to blow th esystem experimenting. Am I correct?

Re: Turn signal and brake light wiring
 

DO NOT GROUND TO FRAME ON AN ELECTRIC CART. You run the risk of sending pack voltage to your 12v lights, stereo, whatever.