What gauge wire ?
I was going to make a jumper wire from the small post with yellow wire on my solenoid to negative post on #6 battery to see if OBC is bad.
Is it Ok to use same gauge wire as yello or should I use larger ? Thanks........ |
Re: What gauge wire ?
18 gauge will be fine.. You're just handling the ground current for the solenoid coil.. The solenoid ground running thru the OBC is how it disables the cart if it senses something amiss..
|
Re: What gauge wire ?
16 gage i think is whats on there now so start there......myself i have several jumpers made up from 16 gage to 12 gage just in case i need one a bit larger and i do use them on other things also......................better safe than sorry
|
Re: What gauge wire ?
Quote:
|
All times are GMT -5. The time now is 04:32 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.