Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Big Block Talk! (https://www.buggiesgonewild.com/forumdisplay.php?f=30)
-   -   Brake Cable Too Short (https://www.buggiesgonewild.com/showthread.php?t=14315)

stogie 03-24-2009 03:35 PM

Brake Cable Too Short
 
After installing my CPP big block kit in a 99 ez-go I can't find a good route for the passenger side brake cable and I keep coming up about 2 inches short of what I need to connect the cable to the fastener. Can anyone give me some advice on how to route the cable?

BigBlockMan 03-24-2009 06:14 PM

Re: Brake Cable Too Short
 
Cable should go through the mount using the hole under clutch.:thumbup:

stogie 03-27-2009 08:13 AM

Re: Brake Cable Too Short
 
I routed through the hole below the drive clutch and still too short. I think I know why I'm having problems. The rearend I'm using has the brake flippers you connect the cable to on the top of the drum instead bottom. My local ezgo dealer was able to get me a 50 1/2" cable from an early 90's something or other that worked with a little modification.

ruredy 03-27-2009 08:31 AM

Re: Brake Cable Too Short
 
You can flip sides on your brake backing plate and make them hook to the bottom. Take off the plate that bolts to the axle tube and put it on the other side upside down, I do that all the time.


All times are GMT -5. The time now is 08:58 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.