Originally Posted by rojo143 (Post 1888673)

Hey all have an issues with my 2011 G29 gasser, and I am kind of lost on how to move forward. My cart recently started making a ticking/clicking sound while driving and I originally thought it was coming from the motor. But after looking into it more it is coming from the rear end. So I pulled the driven clutch off thinking it may have been a broken spring. I pushed the cart around in gear and the clicking/ticking sound is still present and seems to be coming from the input shaft/governor arm area. I can make the sound stop if I press back on the governor arm so it seems like the governor is not fully engaging or disengaging. I have had my governor arm zip tied since I bought it but not cranked all the way down and my rear axle is a green tagged axle. My question is if do the governor bypass by drilling out the governor arm would that solve my problem or am I better off splitting the case and inspecting the input shaft and governor gears?

Originally Posted by Golf cart guy (Post 1889902)

The input shaft in those is prone to fail. The replacement one is good and the issue will never come back. If your going to split the case, just have a new input shaft ready to install.