The rescue build thread.
Rescued a precedent this weekend. It was flooded during hurricane Harvey. Not sure if any of the electronics work but really have no intentions of using any of them anyway. Alltrax 500xct and mot a4 will be going in. Inspection of the rear end showed no signs of water getting in thankfully!
Was able to get it power washed today what a difference! https://uploads.tapatalk-cdn.com/201...36535da4c7.jpghttps://uploads.tapatalk-cdn.com/201...5b6f696482.jpg Sent from my SM-G935V using Tapatalk |
Re: The rescue build thread.
Jake's 6in LT installed. This is my second LT install on a precedent. Can anyone tell me how to get the OEM shock tower out with out cutting into several pieces? The first one I did I fought for 2 hours before I decided to cut it. This time I hit it twice with a hammer it didn't move at all. Pulled out my angle grinder with a cut off wheel and I had it off real quick lol.
Thinking about polishing the frame I spent a few minutes with some mothers aluminum mag polish and it quickly turned to an almost mirror finish. With some power tools itll be really easy. https://uploads.tapatalk-cdn.com/201...03ef997ccb.jpg Sent from my SM-G935V using Tapatalk |
Re: The rescue build thread.
Started the frame polishing today. It's a bit of work but the results are worth it! https://uploads.tapatalk-cdn.com/201...d30d13d573.jpghttps://uploads.tapatalk-cdn.com/201...d1c0a54a1b.jpg
Sent from my SM-G935V using Tapatalk |
Re: The rescue build thread.
How did you Polish it to look like that ? And will it last ? Thanks
Sent from my iPhone using Tapatalk |
Re: The rescue build thread.
I cleaned with mothers aluminum mag polish on a scotch brite pad. Then I wet sanded with 400, 600, 800, 1000, 1500, and 2000 grit paper. Then I polished with a mothers polishing cone and aluminum mag polish. Took about an hour on each section.
It should last a while I guess time will tell. My carts live inside and dont ever see rain/snow. Quote:
|
Re: The rescue build thread.
Starting to iron out the power plant details.
Going lithium again because once you go lithium you'll never go back... Working with Ian at ZEVA this is what we have come up with. I should be able to drive this baby to work and back! [emoji23]https://uploads.tapatalk-cdn.com/201...1bf2702c61.jpg Sent from my SM-G935V using Tapatalk |
Re: The rescue build thread.
Looks like a cool build! You definitely have more patience than me with polishing the frame!
|
Re: The rescue build thread.
Quote:
This is going to be a master piece... I may tear up when it sells. If I can bring myself to sell it when its finished. Lol I'll deff be putting some seat time on it until I know the lithium is good. I spent last weekend making and ordering a stainless hardware kit for precedents. I was able to find everything but the plastic to plastic screws. I'm talking to a manufacture I know through work about making those as well but I can't imagine itll be cost effective. We will see. Once I test fit all the stainless I'll be posting my order list for anyone to use. Sent from my SM-G935V using Tapatalk |
Re: The rescue build thread.
I'm also curious if the shine will last on the aluminum. Aluminum oxidizes over time, giving it the dull appearance. Using the polish compound I think would help the shine last longer.
Have you considered spraying a clear coat? That should "seal" the shine from oxidizing. |
Re: The rescue build thread.
Quote:
Sent from my SM-G935V using Tapatalk |
All times are GMT -5. The time now is 06:52 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.