Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   New Alltrax controller (https://www.buggiesgonewild.com/showthread.php?t=154817)

Canuck2400 07-07-2019 11:10 PM

New Alltrax controller
 
Hello again, still trying to get this cart figured out, I got a new 400 amp solenoid and a new Alltrax XCT 400 controller coming tomorrow, my question is do I use the resistor that comes with the solenoid, or the diode that comes with the controller to go on the larger studs of the solenoid—- sorry if this is a no brainer question, I just don’t want any more problems. The cart in a 2008 EZGO 36v PDS. Thanks

cgtech 07-07-2019 11:59 PM

Re: New Alltrax controller
 
Both, it is layed out in the diagram in the book with the new controller.

cgtech 07-08-2019 12:00 AM

Re: New Alltrax controller
 
Will be better once you have your hands on the parts & The Diagram. We will get you through this no problem.

Canuck2400 07-08-2019 01:14 AM

Re: New Alltrax controller
 
Great —— thank you

Canuck2400 07-08-2019 11:04 AM

Re: New Alltrax controller
 
Well I received the new controller, but there aren’t any diodes included with it, so I don’t know if I use the one I received with the solenoid or have to order the 6A Regen diode ?——Thanks for any help in clearing this up

ThreeCW 07-08-2019 11:10 AM

Re: New Alltrax controller
 
I suggest calling the Alltrax technical support line. They should be able to give you the right advice your application.

Canuck2400 07-08-2019 11:35 AM

Re: New Alltrax controller
 
Thanks I will try that

Canuck2400 07-08-2019 11:52 AM

Re: New Alltrax controller
 
Got it straightened out I hope— use the ones that came with the solenoid
Thanks for your help

ThreeCW 07-08-2019 11:57 AM

Re: New Alltrax controller
 
I was very impressed with the Alltrax technical support when shopping for a replacement controller.

Give them a call if you have any questions or concerns during your install.

Sergio 07-08-2019 11:59 AM

Re: New Alltrax controller
 
The required 6 amps "Regen" diode is the only device on the Solenoid big posts (no resistor) with the cathode (striped end) towards the pack positive battery .

Did Your Solenoid come with a 6 amp diode or just the smaller 3 amp for the coil terminals?


All times are GMT -5. The time now is 01:23 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.