Speed magnet
 

05 club car with GE motor. The speed sensor is a clip in. Do they make a magnet for that??

Re: Speed magnet
 

Not that I know of since those magnets are welded on. High speed Magnets only work on black motors since they have cup style sensor not grey motors because they all have the flat sensors.

Re: Speed magnet
 

Ok thanks a bunch. I too thought the same thing.ay do the speedy link or the bandit motor.

Re: Speed magnet
 

Actually they have the magnets for the GE (grey) motors too!! The magnets are on (in) a washer and can be changed.


CartTrader

Re: Speed magnet
 

How would those get mounted and do you have a link to them?

Re: Speed magnet
 

I have one on order. It should be here today or tomorrow. I got it off Ebay. I don`t know if site sponsors on here carry them or not. From what I was told, they go on the same as the adc (black) motors. They are on a little tighter than the adc motor magnets and harder to get off. Will let you know more when I get mine and "try" to install it.

CartTrader

Re: Speed magnet
 

Got my speed magnet for my GE motor today. Tomorrow I am going to "try" to install. Has anyone installed the speed magnet on the GE motor on a CC? If so what was your experience in doing it? Just how difficult is it to pry the old magnet off? I will try to document my changing of the magnet. Depends on how frustrated I get getting it off. Will try to take pics as I go.

CartTrader

Re: Speed magnet
 

I do hope it isn't welded on as Cmar says.


CartTrader

Re: Speed magnet
 

Got magnet installed. Ad stated it takes about 15 minutes. Took a bit longer than that. Biggest problem was getting in behind the old magnet to pry it off. Used a paint can opener that I had, that has a lip bent in the end. Once I found that it was almost a breeze.


CartTrader

Re: Speed magnet
 

Good to know I had to take my motor off and send it to a electric mtr shop